Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.10758695
- Product Categories
- Friendly Links
Information Name: | EC-2000 polymer adhesive mortar |
Published: | 2013-11-02 |
Validity: | 3000 |
Specifications: | |
Quantity: | 0.00 |
Price Description: | |
Detailed Product Description: | EC-2000 polymer adhesive mortar Sales Tel: 18690497786 (EC2000 insulation board adhesive) Usage: ☆ for extruded insulation board (XPS) and polystyrene board (EPS) of the wall and roof insulation systems underlying sticky knot. ☆ applies to all indoor and outdoor construction sites, such as: plaster walls, precast cement board board, cement floors, etc., aerated concrete or cement-based plaster. ☆ applicable to paste marble, granite, waves of bricks, ceramic bricks. Performance indicators: Adjust Time (min) Open time (min) to adjust the time (min) Tensile bond strength (Mpa) (with 10kg/m3 polystyrene board) compressive shear bonding strength (Mpa) and floor tiles with granite and concrete test index 10 15 0.23 ≥ 0.11, benzene board destruction 1.5-2.7 1.6-2.9 4.2 JC/T547-94> 5 ≮ 10 <0.5 ≮ 0.17 ≮ 1.00 DBJ01-63-02> 5 ≮ 10 ≤ 0.3 ≥ 0.11, benzene board damage ≥ 1.00 How construction? 1, ratio: 1:5 allocation according to water-cement ratio, the material allows only water, you can not add any cement, sand, or other additives. 2, the allocation method: Take a clean bucket, add water, quantitative side down while stirring with a low speed (1000 rpm less) electric mixer for about 3-5 minutes, stand for 2-3 minutes, then The secondary mixing before use. 3, the construction method: high temperature or dry climate, you must first wetting the wall, then cover the bottom mortar, use of special tools or applied directly onto the wall plate on top. 4, the use of time: every 45 minutes for the best deployment of timeliness, the longest usage time is 2 hours. 5 Note: (1) After each use, the initial setting of the remaining material can not be cured dilute with water or with the deployment of new material together. (2) the ambient temperature higher than 35 ℃, the construction should have shading devices, in order to avoid direct exposure to sunlight material dehydration. Ambient temperature is below 4 ℃, not construction. Dosage: Paste polystyrene board construction 3-4kg/m2. Packaging and storage: ※ The product packaging specifications for 25kg / bag. ※ This product should be stored indoors in a dry, ventilated, moisture, rain environment, shelf life of six months. ※ This product is non-toxic, tasteless, no radiation, environmental compliance, according to general cargo storage and transportation of materials. |
Admin>>>
You are the 10725 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Swinge Special Building Materials Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 10725 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Swinge Special Building Materials Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility